Description
Stixall is the tried-and-tested grab adhesive Pro-Tek recommends and sells for installing every panel in the Plain, Double Tile, Multi Tile and Continuous Marble ranges. A single 290ml tube is enough for around one to two panels depending on substrate, and the cartridge fits a standard mastic gun.
The hybrid polymer formula gives a high initial grab so panels hold position while the adhesive cures, then sets to a fully waterproof, flexible bond. It bonds to plasterboard, plywood, tile backer boards and most other substrates specified in our installation guide. No mixing, no waste, no specialist tools.
One 290ml tube. Apply in vertical beads at 200mm centres across the back of the panel, press to the wall, and lock into the tongue-and-groove with the next panel. Allow 24 hours for full cure before silicone sealing or shower use.
The tube ships in a single-unit box with a screw-on nozzle cap. Store upright in a cool, dry place. Pro-Tek recommends ordering one tube per panel as a rough rule of thumb, with a spare for any tricky cuts or reveals.
